Matte boxes

Spare filter frame for the MB-260 matte box. Holds 4x5.65" or 4x4" filters. Same model as the one supplied with the MB-260. Ideal as a replacement or to speed up filter changes.

Magnetic wide-angle mask for MB-260. Blocks stray light and flare, optimized for 24mm full-frame lenses. Supplied with MB-260, also available as a spare.

Standard 138 mm adapter for use of one diopter in the diopter holder.

4,5" Adapter, enables the use of a 4.5" diopter in the diopter holder.

Required for using a MB-216 and MB-256 matte box as a clip-on with 88 mm front diameter lenses. See full specs and details below.

Foldable carbon fibre top flag for MB-4xx and MB-6xx matte boxes, 510 mm wide.

Essential when using a 114 mm clip-on matte box on lenses with M95 internal thread. See details for specs and compatibility.

Compact and lightweight, the Vocas MB-216 matte box kit fits DSLR lenses and supports both clip-on and 15 mm LWS setups. See full specs below.

Essential when using a 114 mm clip-on matte box on lenses with M72 internal thread. See details for specs and compatibility.

Essential when using a 114 mm clip-on matte box on lenses with M77 internal thread. See details for specs and compatibility.

MB-600 combo filter frame for either 4''x5,65'' (vertical) or 5,65''x5,65'' filters

MB-600 single rotatable stackable filter stage, for mounting one 6,6''x6,6'' filter frames or smaller.

MB-600 double rotatable stackable filter stage, for mounting two 6,6''x6,6'' filter frames or smaller.

Required for using a MB-216 and MB-256 matte box as a clip-on with 104 mm front diameter lenses. See full specs and details below.

Separate rubber donut set for Flexible donut adapter ring MB-435 and MB-355 (0420-0601).

Required for using a MB-216 and MB-256 matte box as a clip-on with 100 mm front diameter lenses. See full specs and details below.

Required for using a MB-216 and MB-256 matte box as a clip-on with 87 mm front diameter lenses. See full specs and details below.

Required for using a MB-216 and MB-256 matte box as a clip-on with 98 mm front diameter lenses. See full specs and details below.

MB-43x (150 mm wide) filter frame for 4''x4'' filters.

This 114 mm to 95 mm wide-angle step down ring enables MB-436 matte boxes to be used as clip-on with 95 mm front wide angle lenses. See below for compatibility notes.

Required for using a MB-216 and MB-256 matte box as a clip-on with 85 mm front diameter lenses. See full specs and details below.

Required for using a MB-216 and MB-256 matte box as a clip-on with 98,5 mm front diameter lenses. See full specs and details below.

15 mm Swing away bracket that attached directly to rear of the MB-216, MB-256, MB-260 & MB-43X matte boxes. It allows the matte box to be attached to a 15 mm LWS rail system.